|
− Field terminated RJ45 connector
− Termination of unshielded cable (UTP)
− Termination of shielded cable (STP)
− Approved for solid and stranded wire AWG 26 to AWG 22
− Visual colour coding clip
Standards for the FM45 transmission characteristics
− IEC 60603-7 RJ45 Category 5 ISO/IEC 11801
− IEC 60603-7-3, EN 50173, EIA/TIA 568B
| Mechanical Data |
Electrical Data |
| Number of wire |
8 |
Contact resistance (solid wire – IDC) |
< 1 mΩ |
| Contact material |
Bronze (CuSn6) |
Contact resistance (stranded wire – IDC) |
< 5 mΩ |
| Contact surface |
> 1.2 μm gold over 1.2 μm nickel |
Contact resistance Signal contacts and screen (plug-jack) |
< 20 mΩ |
| Insulation material connector |
Polycarbonate (UL-94-V-0) |
Input-output resistance (plug only) |
< 100 mΩ |
| Mating cycles |
min. > 100 |
Insulation resistance |
(100 V) > 1 GΩ |
| Connection type |
IDC/Insulation displacement contact according IEC 60352-4 |
Dielectric strength (contact-contact) |
> 1000 V DC |
| Surface treatment |
IDC tin-plated approx. 5 μm |
Dielectric strength (shield-contact) |
> 1500 V DC, 1min. |
| Ambient temperature (operation) |
-20 °C ... 70 °C |
Nominal current |
1.75 A 20°C |
| Degree of protection |
IP20 |
Surge voltage category |
1 |
| Pollution degree |
2 |
| Technical Data |
Application and Certification |
| Approved solid wire Ø |
0.4 mm – 0.54 mm (AWG 26 – AWG 23) * 0.64 mm (AWG 22) |
Mechanical, electrical and transmission technical characteristics (measured at 20°C) |
| Approved stranded wire Ø |
0.12 mm2 - 0.32 mm2(AWG 26/7 – AWG 22/7) |
* Cable construction dependent |
| Approved insulation cable Ø |
max. 1.60 mm |
| Cable jacket Ø |
4.5 mm – 8.0 mm |
| Cable strain relief |
> 50 N |
| Shield jacket material |
Brass (CuZn) hot-dip galvanized, 3 μm |
| Wiring |
In pairs (no splitting) |
| Tin plating |
Lead free |
| Housing material |
PA UL-94-V-0 |
| Housing colour |
Military gray RAL 7042 |
|
